Pass HCSP-Presales-Storage(Distribution) V1.0 Exam With Our Huawei H21-921_V1.0 Exam Dumps. Download H21-921_V1.0 Valid Dumps Questions for Instant Success with 100% Passing and Money Back guarantee.
We are glad to introduce the H21-921_V1.0 certification dumps from our company to you, Huawei H21-921_V1.0 Pass4sure Pass Guide After the candidates buy our products, we can offer our new updated dumps for your downloading one year for free, Huawei H21-921_V1.0 Pass4sure Pass Guide Fraudulent Activity You agree to cooperate fully with the Company in any investigation by the Company or its agents regarding fraudulent or improper activity related to the use of this site and its resource, including, but not limited to, fraudulent charge backs and false claims regarding to non-receipt of products, And we only sell the latest H21-921_V1.0 exam questions and answers.
In particular, we should note that a software-intensive H21-921_V1.0 Exam Dumps Collection system is a system, Information infrastructure: Information infrastructure solutions are designed to help manage the information explosion Pass4sure H21-921_V1.0 Pass Guide and address challenges around information compliance, availability, retention and security.
To associate all files of that type to one application, Pass4sure H21-921_V1.0 Pass Guide click the Change All button in that pane, That comes with the visual design, This simply is not the case.
Facebook is all about connecting with friends, Teamchampions.com gives you Huawei H21-921_V1.0 dumps questions with pdf questions and APP test engine software, There's more evidence of an infographics and visualization boom.
Enabling the Front End, The log file think of it as a guest CIS-EM Latest Learning Materials book) can usually tell you the number of visitors, But what about that same level of portability within our homes?
With many candidates, there comes a point during the interview where Pass4sure H21-921_V1.0 Pass Guide you are certain that you would not want to offer them a job, I get best training for my exams with the help of this website.
So called middle skill jobs, typically well paying work that H19-301_V3.0 Simulations Pdf doesn't require extensive higher education, are vanishing, dividing the labor force into high and low skill positions.
Customizing Gmail Settings, Please check back with us often for the latest on these important issues of choice, control, and pocketbook, We are glad to introduce the H21-921_V1.0 certification dumps from our company to you.
After the candidates buy our products, we can offer our new updated dumps Reliable NSE6_ZCS-7.0 Real Exam for your downloading one year for free, Fraudulent Activity You agree to cooperate fully with the Company in any investigation by the Companyor its agents regarding fraudulent or improper activity related to the use https://braindumps2go.validexam.com/H21-921_V1.0-real-braindumps.html of this site and its resource, including, but not limited to, fraudulent charge backs and false claims regarding to non-receipt of products.
And we only sell the latest H21-921_V1.0 exam questions and answers, Though the content of the H21-921_V1.0 exam questions is the same, but the displays vary to make sure that you can study by your favorite way.
Customers who purchased our H21-921_V1.0 study guide will enjoy one-year free update and we will send the latest one to your email once we have any updating about the H21-921_V1.0 dumps pdf.
Time has witness all our effort to make H21-921_V1.0 test braindumps: HCSP-Presales-Storage(Distribution) V1.0 a brilliance in getting thousands of candidates out of the boring traditional study and paving the efficient Pass4sure H21-921_V1.0 Pass Guide and easy path for the Huawei HCSP-Presales-Storage(Distribution) V1.0 actual test to get the certification.
For passing the H21-921_V1.0 exam you must have to take help from valuable H21-921_V1.0 exam valid dumps available at ExamsLead, According to your actual situation, you can choose the suitable version from our H21-921_V1.0 Exam Answers study question.
As a professional IT test learning provider, ExamDown will provide you with more Pass4sure H21-921_V1.0 Pass Guide than just simple exam questions and answers, This means that your product is ready for download, installation and use as soon as your payment is completed.
Before the purchase, the clients can download and try out our H21-921_V1.0 study materials freely, By updating the study system of the H21-921_V1.0 study materials, we can guarantee that our company can provide the newest information about the exam for all people.
So that our materials help hundreds of candidates pass exam Exam H21-921_V1.0 Practice and obtain this certification, This study plan may also have a great impact on your work and life, By devoting ourselves to providing high-quality H21-921_V1.0 practice materials to our customers all these years we can guarantee all content is of the essential part to practice and remember.
NEW QUESTION: 1
All of the following are broad types of benchmarking EXCEPT:
A. competitive benchmarking
B. process benchmarking
C. best-in-class benchmarking
D. personal benchmarking
Answer: D
NEW QUESTION: 2
Scenario:
You work for SWITCH.com. They have just added a new switch (SwitchB) to the existing network as shown in the topology diagram.
RouterA is currently configured correctly and is providing the routing function for devices on SwitchA and SwitchB. SwitchA is currently configured correctly, but will need to be modified to support the addition of SwitchB. SwitchB has a minimal configuration. You have been tasked with competing the needed configuring of SwitchA and SwitchB. SwitchA and SwitchB use Cisco as the enable password.
Configuration Requirements for SwitchA
* The VTP and STP configuration modes on SwitchA should not be modified.
* SwitchA needs to be the root switch for vlans 11, 12, 13, 21, 22 and 23.
All other vlans should be left are their default values.
Configuration Requirements for SwitchB
* Vlan 21
* Name: Marketing
* will support two servers attached to fa0/9 and fa0/10
* Vlan 22
* Name: Sales
* will support two servers attached to fa0/13 and fa0/14
* Vlan 23
o Name: Engineering
o will support two servers attached to fa0/15 and fa0/16
* Access ports that connect to server should transition immediately to forwarding state upon detecting the connection of a device.
* SwitchB VTP mode needs to be the same as SwitchA.
* SwitchB must operate in the same spanning tree mode as SwitchA
* No routing is to be configured on SwitchB
* Only the SVI vlan 1 is to be configured and it is to use address 192.168.1.11/24 Inter-switch Connectivity Configuration Requirements
* For operational and security reasons trunking should be unconditional and Vlans 1, 21, 22 and 23 should tagged when traversing the trunk link.
* The two trunks between SwitchA and SwitchB need to be configured in a mode that allows for the maximum use of their bandwidth for all vlans. This mode should be done with a non-proprietary protocol, with SwitchA controlling activation.
* Propagation of unnecessary broadcasts should be limited using manual pruning on this trunk link.
Answer:
Explanation:
See the explanation for step by step solution:
Explanation
hostname SWITCH_B
!
!
vlan 21
name Marketing
vlan 22
name Sales
vlan 23
name Engineering
!
!
interface FastEthernet0/3
switchport trunk allowed vlan 1,21-23
channel-protocol lacp
channel-group 1 mode passive
switchport mode trunk
!
interface FastEthernet0/4
switchport trunk allowed vlan 1,21-23
channel-protocol lacp
channel-group 1 mode passive
switchport mode trunk
!
interface FastEthernet0/9
switchport access vlan 21
switchport mode access
spanning-tree portfast
!
interface FastEthernet0/10
switchport access vlan 21
switchport mode access
spanning-tree portfast
!
interface FastEthernet0/13
switchport access vlan 22
switchport mode access
spanning-tree portfast
!
!
interface FastEthernet0/14
switchport access vlan 22
switchport mode access
spanning-tree portfast
!
interface FastEthernet0/15
switchport access vlan 23
switchport mode access
spanning-tree portfast
!
interface FastEthernet0/16
switchport access vlan 23
switchport mode access
spanning-tree portfast
!
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
!
interface Port-channel 1
switchport mode trunk
switchport trunk encapsulation dot1q
spanning-tree allowed vlans 1,21-23
!
interface Vlan1
ip address 192.168.1.11 255.255.255.0
!
end
SWITCH_B(config)#
hostname SWITCH_A
!
panning-tree vlan 11 root primary
spanning-tree vlan 12 root primary
spanning-tree vlan 13 root primary
spanning-tree vlan 21 root primary
spanning-tree vlan 22 root primary
spanning-tree vlan 23 root primary
!
interface FastEthernet0/3
switchport trunk allowed vlan 1,21-23
channel-protocol lacp
channel-group 1 mode active
switchport mode trunk
!
interface FastEthernet0/4
switchport trunk allowed vlan 1,21-23
channel-protocol lacp
channel-group 1 mode active
switchport mode trunk
!
interface FastEthernet0/21
switchport access vlan 21
switchport mode access
!
interface FastEthernet0/22
switchport access vlan 22
switchport mode access
!
interface FastEthernet0/23
switchport access vlan 23
switchport mode access
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
!
interface Port-channel 1
!
interface Vlan1
no ip address
shutdown
!
ip default-gateway 192.168.1.1
!
!
End
NEW QUESTION: 3
You installed the Oracle Grid Infrastructure on a four-node cluster before discussing the network requirements with the network administrator who was on holiday.
You created a single scan named mydb-scan.myclust.example.com by adding this name to the /etc/hosts file. As a result, the Grid Infrastructure has four node listeners and node VIP but only a single SCAN listener and SCAN VIP.
The network administrator has returned and modified the corporate DNS server to associate three IP addresses with the mydb-scan.myclust.example.com scan name. The SCAN VIPs are on the same network as the node VIPs.
You now must replace the single SCAN VIP and listener with three of each for high availability purposes and make certain that the SCANs and listeners are active. Which procedure will do this properly if run as the root user?
A. srvctl stop scan_listenersrvctl stop scansrvctl start scansrvctl start scan_listener
B. srvctl add scan -n MYDB-SCAN.MYCLUST.EXAMPLE.COMsrvctl start scansrvctl start scan_listener
C. srvctl stop scan_listenersrvctl stop scansrvctl remove scansrvctl add scan -n MYDB- SCAN.MYCLUST.EXAMPLE.COMsrvctl start scansrvctl start scan_listener
D. srvctl stop scan_listenersrvctl stop scansrvctl remove scansrvctl add scansrvctl start scansrvctl start scan listener
Answer: C
Explanation:
Explanation/Reference:
Explanation:
How to update the IP address of the SCAN VIP resources (ora.scan.vip) [ID 952903.1] Modified 03-JAN-2012 Type HOWTO Status PUBLISHED In this Document
Goal
Solution
Applies to:
Oracle Server - Enterprise Edition - Version: 11.2.0.1 to 11.2.0.1 - Release: 11.2 to 11.2 Information in this document applies to any platform.
Goal
The purpose of this document is to explain how to change the IP addresses associated with the SCAN VIPs in a 11gR2 Grid (CRS) environment.
The IP addresses associated with the SCAN VIP resources are initially set when the SCAN resources are created.
Any changes to the DNS entry for the SCAN are not automatically propagated to the clusterware and need to be done manually.
This applies only to installations that are not using GNS.
The information in this note can also be helpful in cases where SCAN was originally configured with just one address and is now being expanded to accommodate three IP addresses.
Solution
Before the SCAN VIPs can be changed, the entry for the SCAN name on the Domain Name Server (DNS) needs to be updated with the new IP addresses. This usually will be done by a network administrator. To check the current setting, the following command can be used:
nslookup <scan_name>
To check the current IP address(es) of the SCAN VIPs, run the following commands as the root user:
$GRID_HOME/bin/srvctl config scan
Next refresh the SCAN VIPs with the new IP addresses from the DNS entry:
$GRID_HOME/bin/srvctl modify scan -n <scan_name>
To check if the SCAN VIPs have been changed, run the following command, it should now show the new IP addresses.
$GRID_HOME/bin/srvctl config scan
Below is an example using the following configuration:
The name of the SCAN is sales-scan.example.com
subnet of the public network is 10.100.10.0
netmask for the public network is 255.255.255.0
name of the public interface is eth1
old IP addresses: 10.100.10.81, 10.100.10.82 & 10.100.10.83
new IP addresses: 10.100.10.121, 10.100.10.122 & 10.100.10.123
A lookup of the SCAN on the DNS server shows that the entry has already been updated with the new IP addresses:
$ nslookup sales-scan.example.com
Server: dns1.example.com
Address: 10.100.10.70#53
Name: sales-scan.example.com
Address: 10.100.10.123
Name: sales-scan.example.com
Address: 10.100.10.122
Name: sales-scan.example.com
Address: 10.100.10.121
Stop the SCAN listener and the SCAN VIP resources:
# $GRID_HOME/bin/srvctl stop scan_listener
# $GRID_HOME/bin/srvctl stop scan
# $GRID_HOME/bin/srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is not running
SCAN VIP scan2 is enabled
SCAN VIP scan2 is not running
SCAN VIP scan3 is enabled
SCAN VIP scan3 is not running
# $GRID_HOME/bin/srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is not running
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is not running
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is not running
The SCAN VIP resources still show the old IP addresses:
# $GRID_HOME/bin/srvctl config scan
SCAN name: sales-scan, Network: 1/10.100.10.0/255.255.255.0/eth1
SCAN VIP name: scan1, IP: /sales-scan.example.com/10.100.10.81
SCAN VIP name: scan2, IP: /sales-scan.example.com/10.100.10.82
SCAN VIP name: scan3, IP: /sales-scan.example.com/10.100.10.83
Now tell CRS to update the SCAN VIP resources:
# $GRID_HOME/bin/srvctl modify scan -n sales-scan.example.com
To verify that the change was successful, check the SCAN configuration again:
# $GRID_HOME/bin/srvctl config scan
SCAN name: sales-scan, Network: 1/10.100.10.0/255.255.255.0/eth1
SCAN VIP name: scan1, IP: /sales-scan.example.com/10.100.10.121
SCAN VIP name: scan2, IP: /sales-scan.example.com/10.100.10.122
SCAN VIP name: scan3, IP: /sales-scan.example.com/10.100.10.123
Start SCAN and the SCAN listener:
# $GRID_HOME/bin/srvctl start scan
# $GRID_HOME/bin/srvctl start scan_listener
Please note that if the SCAN VIPs are being changed because of a change of the subnet of the public network additional changes may be required , e.g. the node VIPs and the network resource (ora.net1.network). For more information please refer to Document 276434.1 and the 11.2 documentation.
My Oracle Support
NEW QUESTION: 4
Lightweight in-cloud direct video quality diagnosis function, supports intelligent video quality diagnosis of connected cameras, and improves maintenance efficiency.
A. FALSE
B. TRUE
Answer: B
Change language